To program the unit to regenerate after a specific amount of time (ex. Every 3 days or at 4 AM instead of 2 AM), enter the settings and select Set 4 t-h.
The first thing you will have an option to adjust is the default 02 flashing. 02 stands for 2AM and is the set time your unit will regenerate at unless a different number is selected. Use the UP or DOWN arrows to adjust this number if needed to change the time of the regeneration.
To set a specific amount of days for the regeneration to occur, use the CURVED arrow to shift from the flashing ‘02’ to ‘OFF’.
Once ‘OFF’ is flashing, you can use the UP or DOWN arrows to select a set amount of hours/days to have the unit run off of.
Ex. If you wanted to set your unit to go through a regeneration every 3 days, change ‘OFF’ to 072 by using the UP arrow.
Ex. If you wanted to set your unit to go through a regeneration every 2 weeks, change ‘OFF’ to 336 by using the UP arrow.
You can make any selection of time based on your home’s specific regeneration needs.