If the control head is not keeping time, attempt a factory restore.
To initiate a factory restore:
- Unplug the power adapter from the wall outlet
- Press and hold the recycle button
- Plug the power adapter back into the wall outlet
- Release the recycle button
You will then see RESET appear on the control head screen for a few minutes.
Once the RESET is complete, you will be taken back to factory defaults and the main screen will show 12:00 in the upper left corner, T M in the upper right corner, and 1000 gal in the center.
From here, enter the settings by pressing the CURVED arrow and UP arrow together at the same time and reset the clock, along with other settings that you previously had differ from the default settings.
If your time continues to run incorrect, please contact our Customer Support team Mon-Fri. 8:30AM-5:30PM PST
By Phone: (800) 661-0610
By Email: firstname.lastname@example.org