The Sparkle shower filter is designed for simple cartridge replacement. Routine replacement helps maintain consistent filtration performance and keeps shower water flowing properly through the filter media.
The cartridge should be replaced when it reaches its rated capacity.
When to Replace the Cartridge
The Sparkle Shower Filter cartridge should be replaced:
- Every 10,000 gallons (typically 6 months)
If you notice reduced water flow, changes in water quality, or a less noticeable improvement in shower water feel, replacement may be needed sooner.
Sparkle Series Replacement Cartridge
Use the following replacement filter SKU when ordering a replacement filter:
Always confirm the SKU before purchasing to ensure compatibility.
How to Replace the Cartridge
The Sparkle Shower Filter cartridge can be replaced without specialized tools.
Follow these steps:
- Turn off the shower.
- Unscrew the filter housing.
- Remove the used cartridge.
- Insert the new cartridge.
- Reassemble the housing securely.
- Turn the shower on and check for leaks.
- Allow the water to run briefly to flush the new cartridge before normal use.
After replacement, confirm the housing is secure and there are no leaks around the filter connection.